|
|
|
Plastic packed black strap hinges with lag screws. Available in 8" or 10" sizes. Screws are powder coated.
** Hinges come (1) PAIR with POWDER COATED LAG SCREWS per plastic bag - 10 bags per box. More Info |
|
 |
|
|
|
|
|
|
|
Plastic packed black tee hinges with lag screws. Available in 8" or 10" sizes. Screws are powder coated.
** Hinges come (1) PAIR with POWDER COATED LAG SCREWS per plastic bag - 10 bags per box. More Info |
|
 |
|
|
|
|
|
|
|
Latch assembly kit comes with everything needed to install latch on wood fence.
** Latches include (1) LATCH, (1) HANDLE, (1) STRIKER PIN, and POWDER COATED LAG SCREWS per plastic bag - 12 bags per box. More Info |
|
 |
|
|
|
|
|
|
|
(Black Powder Coated)
24" bolt assembly designed to secure 1 side of double wood gates. Powder coated to match hinges and latches. Screws included. More Info |
|
 |
|
|
|
|
|
|
|
Rollers designed for wood gates. Available for lag screwing to gate rails, in either fixed or swivel configurations. Uses 6 inch solid rubber tires. Swivel gate roller uses 5" x 5" x 3/16" plate with 4 holes for sturdy mounting. More Info |
|
 |
|
|
|
|
|
|
|
Galvanized steel brackets designed to join 2 wood rails together. Made from 18 ga. steel. More Info |
|
 |
|
|
|
|
|
|
|
14 ga. steel-ell bracket with 9 ga. strap with set screw. Designed to screw onto wood rail and be supported by steel fence post. Very popular item to run wood fencing using steel posts. More Info |
|
 |
|
|
|
|
|
|
|
Heavy 3/16" x 2" bracket with 9 ga. strap with set screws. Differs from above due to thicker steel and no lip; so can be mounted anywhere on flat surface. More Info |
|
 |
|
|
|
|
|
|
|
Heavy 3/16" X 2" steel bracket with 9 ga. hinge strap designed to be used with carriage bolt to tighten strap using 3/8" x 3 1/2" bolt (not included). More Info |
|
 |
|
|
|
|
|
|
|
End of line wood adapter for attaching wood rails to steel posts. Made from 14 ga. steel with 9 ga. strap with set screw. Has 90º lip for wood rail support. More Info |
|
 |
|
|
|
|
|
|
|
Heavy 3/16" X 2" steel bracket with 9 ga. strap with set screw designed to be used at the end of the line. Used same as above but without a lip so that you can attach it to any flat surface. More Info |
|
 |
|
|
|
|
|
|
|
90º bracket to attach wood rails to corner steel posts. Bracket is 14 ga. and strap is 9 ga. galvanized metal with set screw. Has 90º lip on adapter for rail to sit on. More Info |
|
 |
|
|
|
|
|
|
|
Bracket designed for inside corner applications. Made of 3/16" X 2" steel with 9 ga. strap with set screw. Does not have lip, so can be mounted on any flat surface. More Info |
|
 |
|
|
|
|
|
|
|
Heavy 3/16” x 2” steel bracket with 9 gauge strap with set screw. Similar to corner wood fence adapter but to be used for outside installation. Does not have lip, so it can be mounted on any flat surface. More Info |
|
 |
|
|
|
|
|
|
|
14 ga. brackets used when double sided fence is required. Made from 14 ga. steel with 9 ga. strap for pipe attachment with set screw and lip. More Info |
|
 |
|
|
|
|
|
|
|
14 ga. ell bracket with 12" x 3/4" strap for post attachment with lip. Unit is adjustable for gradient variations. More Info |
|
 |
|
|
|
|
|
|
|
14 ga. galvanized steel ell bracket with 11 ga. band welded to back of bracket. More Info |
|
 |
|
|
|
|
|
|
|
Economical 12 ga. x 3/4" band attached to a 14 ga. flat wood adapter plate. Available in several sizes to fit most common posts. More Info |
|
 |
|
|
|
|
|
|
|
14 ga. flat bracket with holes at all four corners, designed to fit any post from 1 3/8" to 4 1/2" by using proper brace band for attachment. Design features smooth backside of post. Band, bolt and nut sold separately. More Info |
|
 |
|
|
|
|
|
|
|
18 ga. pressed steel bracket designed to hold rails for wood fencing on steel C-Post. More Info |
|
 |
|
|
|
|
|
|
|
14 ga. pressed steel bracket designed to hold rails when building fence using T-Post. Has lip on bottom and set screw digs into "T" on post for secure fastening. More Info |
|
 |
|
|
|
|
|
|
|
18 gauge metal bracket to join rails to wood posts. More Info |
|
 |
|
|
|
|
|
|
|
12 gauge flat bracket designed for 1 3/8" fork assemblies. Can be attached to any flat surface with 1/2" lags. More Info |
|
 |
|
|
|
|
|
|
|
Male post hinges made in 8 gauge galvanized steel and have 5/8" pins. Heavy male hinge uses 3" x 5" plate for attachment. More Info |
|
 |
|
|
|
|