Dash Board
  Hinges
  Sort By: 
Heavy Industrial Hinge

Pressed steel box hinges are a swing gate hinge that permits the gate to swing 90º from the closed to the open position. Hinge is attached to the post with a strap and four carriage bolts. Carriage bolts and nuts are included.

More Info		 Heavy Industrial Hinge
 
PRESSED STEEL HINGE
Pressed steel 180° gate hinges are a swing gate hinge that permits the gate to swing 180° from the closed to the open position. More Info PRESSED STEEL HINGE
 
90º Hinge Washer

Thrust washer designed for industrial 90º hinges.  These are made out of 11 ga. steel and hot dip galvanized.

More Info		 90º Hinge Washer
 
90° WALL MOUNT HINGE
Wall Mount Hinges are a swing gate hinge that permits the gate to swing 90° from the closed to open position. The flat plate is mounted to a wall or flat surface, and can be used on 1 5/8" or 1 7/8" gate frames. More Info 90° WALL MOUNT HINGE
 
BULLDOG HINGE
Pressed steel bulldog hinges are a swing gate hinge that permits the gate to swing 90° from the closed to the open position. Bulldog hinges are attached to the post with a 1/2" U-bolt. More Info BULLDOG HINGE
 
BOX HINGE
Pressed steel box hinges are a swing gate hinge that permits the gate to swing 90° from the closed to the open position. Box hinges are attached to the post with a strap and four 3/8" carriage bolts. Carriage bolts and nuts are included. More Info BOX HINGE
 
UNIVERSAL 90° BOX HINGE
Universal pressed steel box hinges are a swing gate hinge that permits the gate to swing 90° from the closed to the open position. Universal box hinges are attached to the post with a strap and four 3/8" carriage bolts. These hinges are universal because they fit post sizes 2 1/2" through 4 1/2". Bolts and nuts included. More Info UNIVERSAL 90° BOX HINGE
 
GRAVITY HINGE CLOSER
Gravity hinge closers are a swing gate hinge set that is designed to permit the gate to close automatically due to gravity. Carriage bolts and nuts are included. More Info GRAVITY HINGE CLOSER
 
WELD ON CORRAL HINGE
Designed for corral panels, uses 9" corral pin for attachment. Weld on style. 9 gauge. More Info WELD ON CORRAL HINGE
 
9" CORRAL PIN
Designed to attach corral panels together for easy assembly. More Info 9" CORRAL PIN
 
WELD ON CHAIN LATCH
Designed to receive chain on panels for closure. More Info WELD ON CHAIN LATCH
 
FEMALE GATE HINGE
Female gate hinges are a fitting that attaches to the gate frame and functions with the post hinge (also called frame hinge). A 3/8" carriage bolt is used. Carriage bolt and nut sold separately. More Info FEMALE GATE HINGE
 
SPLIT KENNEL HINGE
Split kennel hinges are a fitting that one half of the hinge allows the kennel gate frame to swing while the other half attaches to the kennel panel. Two 3/8" x 1 1/2" carriage bolts and nuts are used. Carriage bolts and nuts are sold separately. 8 gauge x 1 1/2" material. More Info SPLIT KENNEL HINGE
 
WELD ON GATE HINGE
Weld on female 8 ga. steel hinge with 5/8" pinhole, makes a very strong hinge. More Info WELD ON GATE HINGE
 
SQUARE GATE HINGE
Female gate hinges are a fitting that attaches to the gate frame and functions with the post hinge (also called frame hinge). Square female gate hinges are used in applications where square gate frames are used such as ornamental fence. A 3/8" carriage bolt is used. Carriage bolt and nut sold separately. 8 gauge. More Info SQUARE GATE HINGE
 
REGULAR POST HINGE
Post hinges are a fitting that attaches to the gate post, the pintle of which fits the frame hinge permitting the gate to swing (also called male hinge). These hinges are made from 8 gauge x 1" wide steel. A 3/8" x 1 1/2" through 3 1/2" carriage bolt is used. Carriage bolt and nut are sold separately. More Info REGULAR POST HINGE
 
POST HINGE
Post hinges are a fitting that attaches to the gate post, the pintle of which fits the frame hinge permitting the gate to swing. These hinges are made from 8 gauge x 1 1/4" wide or 8 gauge x 1 1/2" wide steel. A 3/8" x 2" through 3 1/2" carriage bolt and nut are used. Carriage bolt and nut sold separately. More Info POST HINGE
 
WELD ON POST HINGE
Weld on male 9 ga. steel hinge with 5/8" pin makes a very strong hinge. More Info WELD ON POST HINGE
 
KENNEL HINGE
Kennel hinges are a fitting that reduces the gap between the gate and panel compared to a male and female hinge combination. A 3/8" x 2" carriage bolt and nut is used. Carriage bolt and nut sold separately. 9 gauge. More Info KENNEL HINGE
 
SQUARE POST HINGE
Square post hinges are a fitting that attaches to the gate post, the pintle of which fits the frame hinge permitting the gate to swing. A 3/8" x 1 1/2" through 4 1/2" carriage bolt and nut is used. Carriage bolt and nut sold separately. More Info SQUARE POST HINGE
 

Hearne Steel  |  ph 979-279-3464  |  fx 979-279-6529  |  Hearne, Texas  |  Email |  Site Map
Copyright 2009-2013 by Hearne Steel Company, Inc. Terms Of Use | Privacy Statement | Register | Login